dmesg - Linux 3.16.0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-031600-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201408031935 SMP Sun Aug 3 23:36:11 UTC 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x000000007a523fff] usable
BIOS-e820: [mem 0x000000007a524000-0x000000007a55efff] ACPI NVS
BIOS-e820: [mem 0x000000007a55f000-0x000000007a7a1fff] ACPI data
BIOS-e820: [mem 0x000000007a7a2000-0x000000007a7fefff] reserved
BIOS-e820: [mem 0x000000007a7ff000-0x000000007a7fffff] ACPI data
BIOS-e820: [mem 0x000000007a800000-0x000000007f1fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Apple Inc. Macmini5,1/Mac-8ED6AF5B48C039E1, BIOS MM51.88Z.0077.B10.1201241549 01/24/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 base 07C000000 mask FFC000000 uncachable
2 base 07B000000 mask FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7a524 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x100400000-0x1005fffff]
[mem 0x100400000-0x1005fffff] page 2M
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x1003fffff]
[mem 0x100000000-0x1003fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0x7a523fff]
[mem 0x40200000-0x7a3fffff] page 2M
[mem 0x7a400000-0x7a523fff] page 4k
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
BRK [0x01fc3000, 0x01fc3fff] PGTABLE
cma: CMA: reserved 64 MiB at 76400000
RAMDISK: [mem 0x35c34000-0x36e11fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE )
ACPI: XSDT 0x000000007A58E1C0 0000AC (v01 APPLE Apple00 00000060 01000013)
ACPI: FACP 0x000000007A58C000 0000F4 (v04 APPLE Apple00 00000060 Loki 0000005F)
ACPI: DSDT 0x000000007A581000 00500C (v01 APPLE Macmini 00050001 INTL 20100915)
ACPI: FACS 0x000000007A53E000 000040
ACPI: HPET 0x000000007A58B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 0x000000007A58A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 0x000000007A588000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 0x000000007A587000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 0x000000007A57D000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
ACPI: SSDT 0x000000007A57A000 000643 (v01 APPLE UsbNoRmh 00001000 INTL 20100915)
ACPI: SSDT 0x000000007A578000 00013F (v01 APPLE SataPrt1 00001000 INTL 20100915)
ACPI: SSDT 0x000000007A577000 000159 (v02 APPLE IGHda 00001000 INTL 20100915)
ACPI: SSDT 0x000000007A573000 001580 (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
ACPI: SSDT 0x000000007A572000 00060E (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
ACPI: SSDT 0x000000007A571000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20100915)
ACPI: SSDT 0x000000007A570000 000315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
ACPI: SSDT 0x000000007A56F000 00037A (v01 PmRef ApTst 00003000 INTL 20100915)
ACPI: MCFG 0x000000007A589000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 0x000000007A580000 0000FA (v01 SataRe SataPri 00001000 INTL 20100915)
ACPI: SSDT 0x000000007A57F000 0000FA (v01 SataRe SataSec 00001000 INTL 20100915)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
Initmem setup node 0 [mem 0x00000000-0x1005fffff]
NODE_DATA [mem 0x1005fb000-0x1005fffff]
[ffffea0000000000-ffffea00041fffff] PMD -> [ffff880073e00000-ffff880075ffffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1005fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00090000-0x0009efff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0x7a523fff]
node 0: [mem 0x100000000-0x1005fffff]
On node 0 totalpages: 501441
DMA zone: 64 pages used for memmap
DMA zone: 157 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7749 pages used for memmap
DMA32 zone: 495908 pages, LIFO batch:31
Normal zone: 24 pages used for memmap
Normal zone: 1536 pages, LIFO batch:0
Reserving Intel graphics stolen memory at 0x7b200000-0x7f1fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0x7a524000-0x7a55efff]
PM: Registered nosave memory: [mem 0x7a55f000-0x7a7a1fff]
PM: Registered nosave memory: [mem 0x7a7a2000-0x7a7fefff]
PM: Registered nosave memory: [mem 0x7a7ff000-0x7a7fffff]
PM: Registered nosave memory: [mem 0x7a800000-0x7f1fffff]
PM: Registered nosave memory: [mem 0x7f200000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0x7f200000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880100200000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 493447
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1803092K/2005764K available (7780K kernel code, 1118K rwdata, 3704K rodata, 1368K init, 1304K bss, 202672K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8912896 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.871 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.74 BogoMIPS (lpj=9179484)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e6f000 - ffffffff81e76000)
ftrace: allocating 31956 entries in 125 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18358.96 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7a524000-0x7a55efff] (241664 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 20:51:58, date: 08/20/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88006F3D2000 000781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88006F386000 0003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88006ECB8000 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9c] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x7f200000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x90907100-0x9090710f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2c] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x2120-0x213f]
pci 0000:00:1a.7: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0x90906c00-0x90906fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90900000-0x90903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c27] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x20c0-0x20df]
pci 0000:00:1d.7: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x90906800-0x90906bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x2148-0x214f]
pci 0000:00:1f.2: reg 0x14: [io 0x215c-0x215f]
pci 0000:00:1f.2: reg 0x18: [io 0x2140-0x2147]
pci 0000:00:1f.2: reg 0x1c: [io 0x2158-0x215b]
pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x206f]
pci 0000:00:1f.2: reg 0x24: [io 0xffe0-0xffef]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90907000-0x909070ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0x90800000-0x908fffff]
pci 0000:06:00.0: [8086:1513] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 06-6c]
pci 0000:00:01.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.1: bridge window [mem 0x90a00000-0x953fffff]
pci 0000:00:01.1: bridge window [mem 0x94f00000-0x98ffffff 64bit pref]
pci 0000:07:00.0: [8086:1513] type 01 class 0x060400
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.0: [8086:1513] type 01 class 0x060400
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:04.0: [8086:1513] type 01 class 0x060400
pci 0000:07:04.0: supports D1 D2
pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:05.0: [8086:1513] type 01 class 0x060400
pci 0000:07:05.0: supports D1 D2
pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:06.0: [8086:1513] type 01 class 0x060400
pci 0000:07:06.0: supports D1 D2
pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-6c]
pci 0000:06:00.0: bridge window [mem 0x90a00000-0x913fffff]
pci 0000:06:00.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:08:00.0: [8086:1513] type 00 class 0x088000
pci 0000:08:00.0: reg 0x10: [mem 0x90c00000-0x90c3ffff]
pci 0000:08:00.0: reg 0x14: [mem 0x90c40000-0x90c40fff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:00.0: bridge window [mem 0x90c00000-0x90cfffff]
pci 0000:07:03.0: PCI bridge to [bus 09]
pci 0000:07:03.0: bridge window [mem 0x90b00000-0x90bfffff]
pci 0000:0a:00.0: [8086:1513] type 01 class 0x060400
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:04.0: PCI bridge to [bus 0a-3a]
pci 0000:07:04.0: bridge window [mem 0x90d00000-0x912fffff]
pci 0000:07:04.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:0b:00.0: [8086:1513] type 01 class 0x060400
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:01.0: [8086:1513] type 01 class 0x060400
pci 0000:0b:01.0: supports D1 D2
pci 0000:0b:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:02.0: [8086:1513] type 01 class 0x060400
pci 0000:0b:02.0: supports D1 D2
pci 0000:0b:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:03.0: [8086:1513] type 01 class 0x060400
pci 0000:0b:03.0: supports D1 D2
pci 0000:0b:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:04.0: [8086:1513] type 01 class 0x060400
pci 0000:0b:04.0: supports D1 D2
pci 0000:0b:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:05.0: [8086:1513] type 01 class 0x060400
pci 0000:0b:05.0: supports D1 D2
pci 0000:0b:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PCI bridge to [bus 0b-13]
pci 0000:0a:00.0: bridge window [mem 0x90d00000-0x912fffff]
pci 0000:0a:00.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:0c:00.0: [12d8:400c] type 01 class 0x060400
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.0: PCI bridge to [bus 0c-0e]
pci 0000:0b:00.0: bridge window [mem 0x91200000-0x912fffff]
pci 0000:0d:03.0: [12d8:400c] type 01 class 0x060400
pci 0000:0d:03.0: supports D1 D2
pci 0000:0d:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0c:00.0: PCI bridge to [bus 0d-0e]
pci 0000:0c:00.0: bridge window [mem 0x91200000-0x912fffff]
pci 0000:0e:00.0: [12d8:400e] type 00 class 0x0c0310
pci 0000:0e:00.0: reg 0x10: [mem 0x91201000-0x91201fff]
pci 0000:0e:00.0: supports D1 D2
pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:00.1: [12d8:400e] type 00 class 0x0c0310
pci 0000:0e:00.1: reg 0x10: [mem 0x91200000-0x91200fff]
pci 0000:0e:00.1: supports D1 D2
pci 0000:0e:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:00.2: [12d8:400f] type 00 class 0x0c0320
pci 0000:0e:00.2: reg 0x10: [mem 0x91202000-0x912020ff]
pci 0000:0e:00.2: supports D1 D2
pci 0000:0e:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:03.0: PCI bridge to [bus 0e]
pci 0000:0d:03.0: bridge window [mem 0x91200000-0x912fffff]
pci 0000:0f:00.0: [14e4:16b0] type 00 class 0x020000
pci 0000:0f:00.0: reg 0x10: [mem 0x94f00000-0x94f0ffff 64bit pref]
pci 0000:0f:00.0: reg 0x18: [mem 0x94f10000-0x94f1ffff 64bit pref]
pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:01.0: PCI bridge to [bus 0f]
pci 0000:0b:01.0: bridge window [mem 0x91100000-0x911fffff]
pci 0000:0b:01.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:10:00.0: [11c1:5901] type 00 class 0x0c0010
pci 0000:10:00.0: reg 0x10: [mem 0x91000000-0x91000fff 64bit]
pci 0000:10:00.0: supports D1 D2
pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:02.0: PCI bridge to [bus 10]
pci 0000:0b:02.0: bridge window [mem 0x91000000-0x910fffff]
pci 0000:0b:03.0: PCI bridge to [bus 11]
pci 0000:0b:03.0: bridge window [mem 0x90f00000-0x90ffffff]
pci 0000:0b:04.0: PCI bridge to [bus 12]
pci 0000:0b:04.0: bridge window [mem 0x90e00000-0x90efffff]
pci 0000:0b:05.0: PCI bridge to [bus 13]
pci 0000:0b:05.0: bridge window [mem 0x90d00000-0x90dfffff]
pci 0000:07:05.0: PCI bridge to [bus 3b-6b]
pci 0000:07:05.0: bridge window [mem 0x91300000-0x913fffff]
pci 0000:07:06.0: PCI bridge to [bus 6c]
pci 0000:07:06.0: bridge window [mem 0x90a00000-0x90afffff]
pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0x90400000-0x9040ffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0x90410000-0x9041ffff 64bit pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
pci 0000:02:00.1: reg 0x10: [mem 0x90420000-0x9042ffff 64bit pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0x90700000-0x907fffff]
pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0x90600000-0x90603fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
pci 0000:04:00.0: [104c:823e] type 01 class 0x060400
pci 0000:04:00.0: supports D1 D2
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
pci 0000:05:00.0: [104c:823f] type 00 class 0x0c0010
pci 0000:05:00.0: reg 0x10: [mem 0x90504000-0x905047ff]
pci 0000:05:00.0: reg 0x14: [mem 0x90500000-0x90503fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0x90500000-0x905fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:01.1: can't claim BAR 15 [mem 0x94f00000-0x98ffffff 64bit pref]: address conflict with PCI Bus 0000:06 [mem 0x90a00000-0x953fffff]
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7a524000-0x7bffffff]
e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs APP000b (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x20000000-0x201fffff] has been reserved
system 00:05: [mem 0x40000000-0x401fffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:07:03.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
pci 0000:07:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
pci 0000:0b:04.0: bridge window [io 0x1000-0x0fff] to [bus 12] add_size 1000
pci 0000:0b:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000
pci 0000:0b:05.0: bridge window [io 0x1000-0x0fff] to [bus 13] add_size 1000
pci 0000:0b:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 13] add_size 200000
pci 0000:0b:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:0b:05.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:0a:00.0: bridge window [io 0x1000-0x0fff] to [bus 0b-13] add_size 2000
pci 0000:0a:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
pci 0000:07:04.0: bridge window [io 0x1000-0x0fff] to [bus 0a-3a] add_size 2000
pci 0000:07:05.0: bridge window [io 0x1000-0x0fff] to [bus 3b-6b] add_size 1000
pci 0000:07:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-6b] add_size 200000
pci 0000:07:06.0: bridge window [io 0x1000-0x0fff] to [bus 6c] add_size 1000
pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6c] add_size 200000
pci 0000:07:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
pci 0000:07:05.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:06.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:06:00.0: bridge window [io 0x1000-0x0fff] to [bus 07-6c] add_size 5000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0x90800000-0x908fffff]
pci 0000:06:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 5000
pci 0000:06:00.0: BAR 13: can't assign io (size 0x5000)
pci 0000:06:00.0: BAR 13: can't assign io (size 0x5000)
pci 0000:07:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:07:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:07:06.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:07:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
pci 0000:07:05.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:06.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:03.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:07:05.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:07:06.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:07:03.0: BAR 13: can't assign io (size 0x1000)
pci 0000:07:04.0: BAR 13: can't assign io (size 0x2000)
pci 0000:07:05.0: BAR 13: can't assign io (size 0x1000)
pci 0000:07:06.0: BAR 13: can't assign io (size 0x1000)
pci 0000:07:06.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:07:06.0: BAR 13: can't assign io (size 0x1000)
pci 0000:07:05.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:07:05.0: BAR 13: can't assign io (size 0x1000)
pci 0000:07:04.0: BAR 13: can't assign io (size 0x2000)
pci 0000:07:03.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:07:03.0: BAR 13: can't assign io (size 0x1000)
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:00.0: bridge window [mem 0x90c00000-0x90cfffff]
pci 0000:07:03.0: PCI bridge to [bus 09]
pci 0000:07:03.0: bridge window [mem 0x90b00000-0x90bfffff]
pci 0000:0a:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
pci 0000:0a:00.0: BAR 13: can't assign io (size 0x2000)
pci 0000:0a:00.0: BAR 13: can't assign io (size 0x2000)
pci 0000:0b:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:0b:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:0b:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:0b:05.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:0b:04.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0b:05.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0b:04.0: BAR 13: can't assign io (size 0x1000)
pci 0000:0b:05.0: BAR 13: can't assign io (size 0x1000)
pci 0000:0b:05.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0b:05.0: BAR 13: can't assign io (size 0x1000)
pci 0000:0b:04.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0b:04.0: BAR 13: can't assign io (size 0x1000)
pci 0000:0d:03.0: PCI bridge to [bus 0e]
pci 0000:0d:03.0: bridge window [mem 0x91200000-0x912fffff]
pci 0000:0c:00.0: PCI bridge to [bus 0d-0e]
pci 0000:0c:00.0: bridge window [mem 0x91200000-0x912fffff]
pci 0000:0b:00.0: PCI bridge to [bus 0c-0e]
pci 0000:0b:00.0: bridge window [mem 0x91200000-0x912fffff]
pci 0000:0b:01.0: PCI bridge to [bus 0f]
pci 0000:0b:01.0: bridge window [mem 0x91100000-0x911fffff]
pci 0000:0b:01.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:0b:02.0: PCI bridge to [bus 10]
pci 0000:0b:02.0: bridge window [mem 0x91000000-0x910fffff]
pci 0000:0b:03.0: PCI bridge to [bus 11]
pci 0000:0b:03.0: bridge window [mem 0x90f00000-0x90ffffff]
pci 0000:0b:04.0: PCI bridge to [bus 12]
pci 0000:0b:04.0: bridge window [mem 0x90e00000-0x90efffff]
pci 0000:0b:05.0: PCI bridge to [bus 13]
pci 0000:0b:05.0: bridge window [mem 0x90d00000-0x90dfffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b-13]
pci 0000:0a:00.0: bridge window [mem 0x90d00000-0x912fffff]
pci 0000:0a:00.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:07:04.0: PCI bridge to [bus 0a-3a]
pci 0000:07:04.0: bridge window [mem 0x90d00000-0x912fffff]
pci 0000:07:04.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:07:05.0: PCI bridge to [bus 3b-6b]
pci 0000:07:05.0: bridge window [mem 0x91300000-0x913fffff]
pci 0000:07:06.0: PCI bridge to [bus 6c]
pci 0000:07:06.0: bridge window [mem 0x90a00000-0x90afffff]
pci 0000:06:00.0: PCI bridge to [bus 07-6c]
pci 0000:06:00.0: bridge window [mem 0x90a00000-0x913fffff]
pci 0000:06:00.0: bridge window [mem 0x94f00000-0x94ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 06-6c]
pci 0000:00:01.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.1: bridge window [mem 0x90a00000-0x953fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0x90700000-0x907fffff]
pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x7f200000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 1 [mem 0x90800000-0x908fffff]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0x90a00000-0x953fffff]
pci_bus 0000:07: resource 1 [mem 0x90a00000-0x913fffff]
pci_bus 0000:07: resource 2 [mem 0x94f00000-0x94ffffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0x90c00000-0x90cfffff]
pci_bus 0000:09: resource 1 [mem 0x90b00000-0x90bfffff]
pci_bus 0000:0a: resource 1 [mem 0x90d00000-0x912fffff]
pci_bus 0000:0a: resource 2 [mem 0x94f00000-0x94ffffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0x90d00000-0x912fffff]
pci_bus 0000:0b: resource 2 [mem 0x94f00000-0x94ffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0x91200000-0x912fffff]
pci_bus 0000:0d: resource 1 [mem 0x91200000-0x912fffff]
pci_bus 0000:0e: resource 1 [mem 0x91200000-0x912fffff]
pci_bus 0000:0f: resource 1 [mem 0x91100000-0x911fffff]
pci_bus 0000:0f: resource 2 [mem 0x94f00000-0x94ffffff 64bit pref]
pci_bus 0000:10: resource 1 [mem 0x91000000-0x910fffff]
pci_bus 0000:11: resource 1 [mem 0x90f00000-0x90ffffff]
pci_bus 0000:12: resource 1 [mem 0x90e00000-0x90efffff]
pci_bus 0000:13: resource 1 [mem 0x90d00000-0x90dfffff]
pci_bus 0000:3b: resource 1 [mem 0x91300000-0x913fffff]
pci_bus 0000:6c: resource 1 [mem 0x90a00000-0x90afffff]
pci_bus 0000:02: resource 1 [mem 0x90700000-0x907fffff]
pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0x90600000-0x906fffff]
pci_bus 0000:04: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:05: resource 1 [mem 0x90500000-0x905fffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS mismatch (256 != 128), using 64 bytes
pci 0000:0e:00.2: EHCI: unrecognized capability 00
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18296K (ffff880035c34000 - ffff880036e12000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x6fe00000-0x73e00000] (64MB) mapped at [ffff88006fe00000-ffff880073dfffff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1408567918.680:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 3685
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: enabling device (0000 -> 0002)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
pcieport 0000:06:00.0: irq 42 for MSI/MSI-X
pcieport 0000:07:00.0: irq 43 for MSI/MSI-X
pcieport 0000:07:03.0: enabling device (0000 -> 0002)
pcieport 0000:07:03.0: irq 44 for MSI/MSI-X
pcieport 0000:07:04.0: irq 45 for MSI/MSI-X
pcieport 0000:07:05.0: enabling device (0000 -> 0002)
pcieport 0000:07:05.0: irq 46 for MSI/MSI-X
pcieport 0000:07:06.0: enabling device (0000 -> 0002)
pcieport 0000:07:06.0: irq 47 for MSI/MSI-X
pcieport 0000:0a:00.0: irq 48 for MSI/MSI-X
pcieport 0000:0b:00.0: irq 49 for MSI/MSI-X
pcieport 0000:0b:01.0: irq 50 for MSI/MSI-X
pcieport 0000:0b:02.0: irq 51 for MSI/MSI-X
pcieport 0000:0b:03.0: enabling device (0000 -> 0002)
pcieport 0000:0b:03.0: irq 52 for MSI/MSI-X
pcieport 0000:0b:04.0: enabling device (0000 -> 0002)
pcieport 0000:0b:04.0: irq 53 for MSI/MSI-X
pcieport 0000:0b:05.0: enabling device (0000 -> 0002)
pcieport 0000:0b:05.0: irq 54 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:07:03.0:pcie24: Slot #3 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:07:03.0:pcie24: service driver pciehp loaded
pciehp 0000:07:04.0:pcie24: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:07:04.0:pcie24: service driver pciehp loaded
pciehp 0000:07:05.0:pcie24: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:07:05.0:pcie24: service driver pciehp loaded
pciehp 0000:07:06.0:pcie24: Slot #6 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:07:06.0:pcie24: service driver pciehp loaded
pciehp 0000:0b:04.0:pcie24: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:0b:04.0:pcie24: service driver pciehp loaded
pciehp 0000:0b:05.0:pcie24: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:0b:05.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x1200x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0x80000000, mapped to 0xffffc9000a100000, using 7552k, total 7552k
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
hpet: probe of PNP0103:00 failed with error -22
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x215c bmdma 0x2060 irq 19
ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x2158 bmdma 0x2068 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 2
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 23, io mem 0x90906c00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 2
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 22, io mem 0x90906800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ehci-pci 0000:0e:00.2: EHCI Host Controller
ehci-pci 0000:0e:00.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:0e:00.2: irq 18, io mem 0x91202000
ehci-pci 0000:0e:00.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
usb usb3: SerialNumber: 0000:0e:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002120
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-031600-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020c0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-031600-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 2294.787 MHz
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0424, idProduct=2513
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 221aac025e17c8e76d8197a53aa765a4617ae7dc'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 10:975:902
usb usb2-port3: hash matches
rtc_cmos 00:02: setting system clock to 2014-08-20 20:52:00 UTC (1408567920)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 2-1: New USB device found, idVendor=0424, idProduct=2513
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1.01: failed to resume link (SControl 0)
usb 3-1: New USB device found, idVendor=05ac, idProduct=9127
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 7 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: Hitachi HTS545050B9A302, PB4AC60Y, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 C60Y PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Switched to clocksource tsc
usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: BRCM20702 Hub
usb 1-1.1: Manufacturer: Apple Inc.
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 3 ports detected
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
Freeing unused kernel memory: 1368K (ffffffff81d19000 - ffffffff81e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 400K (ffff88000179c000 - ffff880001800000)
Freeing unused kernel memory: 392K (ffff880001b9e000 - ffff880001c00000)
systemd-udevd[131]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:0e:00.0: OHCI PCI host controller
ohci-pci 0000:0e:00.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:0e:00.0: irq 16, io mem 0x91201000
firewire_ohci 0000:10:00.0: irq 55 for MSI/MSI-X
tg3.c:v3.137 (May 11, 2014)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
usb 2-1.1: New USB device found, idVendor=05ac, idProduct=8242
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: IR Receiver
usb 2-1.1: Manufacturer: Apple Computer, Inc.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.16.0-031600-generic ohci_hcd
usb usb6: SerialNumber: 0000:0e:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:0e:00.1: OHCI PCI host controller
ohci-pci 0000:0e:00.1: new USB bus registered, assigned bus number 7
ohci-pci 0000:0e:00.1: irq 17, io mem 0x91200000
firewire_ohci 0000:10:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0, physUB
tg3 0000:0f:00.0 eth0: Tigon3 [partno(BCM957761) rev 57785100] (PCI Express) MAC address 40:6c:8f:19:57:91
tg3 0000:0f:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:0f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0f:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
random: nonblocking pool is initialized
tg3 0000:02:00.0 eth1: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address c8:2a:14:54:e9:77
tg3 0000:02:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
usb 2-1.2: new full-speed USB device number 4 using ehci-pci
firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x2
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.16.0-031600-generic ohci_hcd
usb usb7: SerialNumber: 0000:0e:00.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-1.3: new low-speed USB device number 5 using ehci-pci
usb 2-1.3: New USB device found, idVendor=04f2, idProduct=0833
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB Keyboard
usb 2-1.3: Manufacturer: CHICONY
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/0003:04F2:0833.0002/input/input3
hid-generic 0003:04F2:0833.0002: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.7-1.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.1/0003:04F2:0833.0003/input/input4
hid-generic 0003:04F2:0833.0003: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1d.7-1.3/input1
usb 3-1.4: new full-speed USB device number 3 using ehci-pci
usb 3-1.4: New USB device found, idVendor=05ac, idProduct=1107
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: Display Audio
usb 3-1.4: Manufacturer: Apple Inc.
usb 3-1.4: SerialNumber: 16100E0A
input: Apple Inc. Display Audio as /devices/pci0000:00/0000:00:01.1/0000:06:00.0/0000:07:04.0/0000:0a:00.0/0000:0b:00.0/0000:0c:00.0/0000:0d:03.0/0000:0e:00.2/usb3/3-1/3-1.4/3-1.4:1.3/0003:05AC:1107.0004/input/input5
hid-generic 0003:05AC:1107.0004: input,hidraw2: USB HID v1.11 Device [Apple Inc. Display Audio] on usb-0000:0e:00.2-1.4/input3
firewire_core 0000:10:00.0: created device fw0: GUID 000a270200437ad0, S800
firewire_core 0000:10:00.0: phy config: new root=ffc0, gap_count=63
usb 3-1.5: new high-speed USB device number 4 using ehci-pci
firewire_core 0000:05:00.0: created device fw1: GUID c82a14fffee044d6, S800
usb 3-1.5: New USB device found, idVendor=05ac, idProduct=1112
usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.5: Product: FaceTime HD Camera (Display)
usb 3-1.5: Manufacturer: Apple Inc.
usb 3-1.5: SerialNumber: CCGC2Q03S8DJ9DFX
usb 3-1.7: new full-speed USB device number 5 using ehci-pci
usb 3-1.7: New USB device found, idVendor=05ac, idProduct=9227
usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.7: Product: Apple Thunderbolt Display
usb 3-1.7: Manufacturer: Apple Inc.
usb 3-1.7: SerialNumber: 16100E0A
hid-generic 0003:05AC:9227.0005: hiddev0,hidraw3: USB HID v1.11 Device [Apple Inc. Apple Thunderbolt Display] on usb-0000:0e:00.2-1.7/input0
usb 1-1.1.1: new full-speed USB device number 4 using ehci-pci
irq 16: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-031600-generic #201408031935
Hardware name: Apple Inc. Macmini5,1/Mac-8ED6AF5B48C039E1, BIOS MM51.88Z.0077.B10.1201241549 01/24/2012
ffff88006edd72a4 ffff880100203e28 ffffffff81786525 00000000000031f8
ffff88006edd7200 ffff880100203e58 ffffffff810d379d ffff880100203e88
ffff88006edd7200 0000000000000010 0000000000000000 ffff880100203e88
Call Trace:
[] dump_stack+0x46/0x58
[] __report_bad_irq+0x3d/0xe0
[] note_interrupt+0x1ca/0x220
[] handle_irq_event_percpu+0xb1/0x1e0
[] ? native_sched_clock+0x35/0x90
[] handle_irq_event+0x48/0x70
[] handle_fasteoi_irq+0x84/0x110
[] handle_irq+0x22/0x40
[] do_IRQ+0x5e/0x110
[] common_interrupt+0x6d/0x6d
[] ? poll_idle+0x4a/0xc0
[] ? poll_idle+0x1c/0xc0
[] ? read_tsc+0x9/0x20
[] ? ktime_get+0x54/0xe0
[] cpuidle_enter_state+0x4f/0xe0
[] cpuidle_enter+0x17/0x20
[] cpuidle_idle_call+0xe9/0x260
[] cpu_idle_loop+0x1e5/0x200
[] ? early_idt_handlers+0x120/0x120
[] cpu_startup_entry+0x5b/0x60
[] rest_init+0x77/0x80
[] start_kernel+0x3b3/0x3ba
[] ? set_init_arg+0x56/0x56
[] ? memblock_reserve+0x4c/0x51
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x144/0x153
handlers:
[] usb_hcd_irq
Disabling IRQ #16
usb 1-1.1.1: New USB device found, idVendor=05ac, idProduct=820a
usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 05ac:820a as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:05AC:820A.0006/input/input6
hid-generic 0003:05AC:820A.0006: input,hidraw4: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0
usb 1-1.1.2: new full-speed USB device number 5 using ehci-pci
usb 1-1.1.2: New USB device found, idVendor=05ac, idProduct=820b
usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 05ac:820b as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:05AC:820B.0007/input/input7
hid-generic 0003:05AC:820B.0007: input,hidraw5: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0
usb 1-1.1.3: new full-speed USB device number 6 using ehci-pci
usb 1-1.1.3: New USB device found, idVendor=05ac, idProduct=8281
usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.3: Product: Bluetooth USB Host Controller
usb 1-1.1.3: Manufacturer: Apple Inc.
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.2: new full-speed USB device number 6 using ehci-pci
usb 2-1.2: New USB device found, idVendor=1532, idProduct=0101
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Razer Copperhead Laser Mouse
usb 2-1.2: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/0003:1532:0101.0008/input/input8
hid-generic 0003:1532:0101.0008: input,hidraw6: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.7-1.2/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.1/0003:1532:0101.0009/input/input9
hid-generic 0003:1532:0101.0009: input,hidraw7: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.7-1.2/input1
Adding 2006012k swap on /dev/sda7. Priority:-1 extents:1 across:2006012k FS
systemd-udevd[298]: starting version 204
audit: type=1400 audit(1408567934.001:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=337 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=337 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=337 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=337 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=337 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=338 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=338 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=338 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=337 comm="apparmor_parser"
audit: type=1400 audit(1408567934.001:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=338 comm="apparmor_parser"
bcma: bus0: Found chip with id 0x4331, rev 0x02 and package 0x09
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
bcma: bus0: Bus registered
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 56 for MSI/MSI-X
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
apple_gmux: gmux device not present
input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/0003:05AC:8242.0001/input/input10
appleir 0003:05AC:8242.0001: input,hiddev0,hidraw8: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.7-1.1/input0
media: Linux media interface: v0.10
applesmc: key=297 fan=1 temp=40 index=38 acc=0 lux=0 kbd=0
Linux video capture interface: v2.00
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (80000000 760000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
AVX version of gcm_enc/dec engaged.
i915 0000:00:02.0: irq 57 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 1:2: cannot get freq at ep 0x4
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: Warning! Unlikely big volume range (=16384), cval->res is probably wrong.
usb 3-1.4: [2] FU [PCM Playback Volume] ch = 2, val = -16384/0/1
usb 3-1.4: Warning! Unlikely big volume range (=15872), cval->res is probably wrong.
usb 3-1.4: [5] FU [Mic Capture Volume] ch = 1, val = -11264/4608/1
usbcore: registered new interface driver snd-usb-audio
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Display) (05ac:1112)
input: FaceTime HD Camera (Display) as /devices/pci0000:00/0000:00:01.1/0000:06:00.0/0000:07:04.0/0000:0a:00.0/0000:0b:00.0/0000:0c:00.0/0000:0d:03.0/0000:0e:00.2/usb3/3-1/3-1.5/3-1.5:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-1.1.1: USB disconnect, device number 4
cfg80211: Calling CRDA to update world regulatory domain
sound hdaudioC0D0: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x10/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Line=0xc
sound hdaudioC0D0: dig-in=0xf
usb 1-1.1.2: USB disconnect, device number 5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
intel_rapl: RAPL domain dram detection failed
b43-phy0: Broadcom 4331 WLAN found (core revision 29)
b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
b43-phy0 warning: 5 GHz band is unsupported on this PHY
Broadcom 43xx driver loaded [ Features: PNL ]
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
b43 bcma0:0: Direct firmware load failed with error -2
b43 bcma0:0: Falling back to user helper
b43 bcma0:0: Direct firmware load failed with error -2
b43 bcma0:0: Falling back to user helper
b43 bcma0:0: Direct firmware load failed with error -2
b43 bcma0:0: Falling back to user helper
b43 bcma0:0: Direct firmware load failed with error -2
b43 bcma0:0: Falling back to user helper
b43-phy0 ERROR: Firmware file "b43/ucode29_mimo.fw" request failed (err=-12)
b43-phy0 ERROR: Firmware file "b43-open/ucode29_mimo.fw" request failed (err=-12)
b43-phy0 ERROR: You must go to and download the correct firmware for this driver version. Please carefully read all instructions on this website.
EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
init: failsafe main process (629) killed by TERM signal
audit_printk_skb: 6 callbacks suppressed
audit: type=1400 audit(1408567940.973:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1408567940.973:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1408567940.973:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=747 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit: type=1400 audit(1408567941.241:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1408567941.241:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1408567941.241:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1408567941.241:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1408567941.241:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1408567941.241:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1408567941.241:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=790 comm="apparmor_parser"
init: cups main process (749) killed by HUP signal
init: cups main process ended, respawning
tg3 0000:0f:00.0: irq 59 for MSI/MSI-X
tg3 0000:0f:00.0: irq 60 for MSI/MSI-X
tg3 0000:0f:00.0: irq 61 for MSI/MSI-X
tg3 0000:0f:00.0: irq 62 for MSI/MSI-X
tg3 0000:0f:00.0: irq 63 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: irq 64 for MSI/MSI-X
tg3 0000:02:00.0: irq 65 for MSI/MSI-X
tg3 0000:02:00.0: irq 66 for MSI/MSI-X
tg3 0000:02:00.0: irq 67 for MSI/MSI-X
tg3 0000:02:00.0: irq 68 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
tg3 0000:02:00.0 eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth1: Flow control is on for TX and on for RX
tg3 0000:02:00.0 eth1: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 1:1: cannot get freq at ep 0x4
usb 3-1.4: 2:1: cannot get freq at ep 0x84
usb 3-1.4: 2:1: cannot get freq at ep 0x84
audit_printk_skb: 132 callbacks suppressed
audit: type=1400 audit(1408567971.059:68): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2045 comm="apparmor_parser"
audit: type=1400 audit(1408567971.059:69): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2045 comm="apparmor_parser"
audit: type=1400 audit(1408567971.059:70): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2045 comm="apparmor_parser"
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000